Pump Parts Manufacturing and Fabrication in Houston, TX
Vi-TECH handles pump parts machining for impellers, shafts, sleeves, casings and coupling hubs, plus turbine and valve parts, up to 55 in diameter. Balancing happens in the same shop and on the same purchase order.
What we manufacture and fabricate in Pasadena, TX
Vi-TECH manufactures replacement pump parts by CNC and conventional machining in Pasadena, TX, from your drawing and revision or reverse-engineered from the worn sample you send: impellers, shafts up to 12 ft, sleeves, casings, bearing housings, wear rings, bushings and coupling hubs, up to 55 in diameter. Fabrication here means machining the wear part, not welded package skids. Rotating parts can be balanced in the same building on the same purchase order, with a balance report.
What we machine
- Pump impellers: trim, bore, keyway, wear-ring fits and balance as one production flow
- Pump casings and bearing housings
- Shafts and sleeves
- Coupling hubs and spacers
- Turbine parts
- Valve parts
- Reverse-engineered replacement parts from samples
Pump and rotor shaft machining
We machine new and replacement shafts for pumps, turbines, fans and motors up to 12 ft long, including turning, keyways and sleeve fits. Shafts are made to your drawing or reverse-engineered from the worn part, and the finished rotor can be balanced in the same building on the same purchase order, with a balance report.
Equipment
- HAAS CNC lathes and machining centers
- Conventional lathes, mills and boring
- Parts up to 55 in diameter
- Shafts up to 12 ft long
- Schenck balancing in the same building, to 40,000 lb
For OEMs and repair shops
We build to your drawing, revision and material spec, and we take overflow work when your own shop is full. See OEM build-to-print machining. Impellers that need trimming are balanced right after machining; see impeller balancing.
Materials and lead time
Most of the pump parts we machine are stainless steel and carbon steel. Standard lead time is about one week from an approved drawing or sample, and rush work is accepted.
How an order works
- Send the drawing or sample, material, quantity and required date.
- We return a price and lead time.
- We machine the part.
- If it rotates, we balance it and include a balance report.
- It ships nationwide, or is ready for same-day pickup on the Texas and Louisiana Gulf Coast.
Pump parts machining questions
What pump parts do you machine?
Impellers, shafts, sleeves, casings, bearing housings, wear rings, bushings and coupling hubs, plus turbine and valve parts, up to 55 in diameter.
Can you make a part without a drawing?
Yes. We reverse-engineer replacement parts from a sample you send.
Do machined parts get balanced?
Rotating parts can be balanced in the same building on the same purchase order, up to 40,000 lb.
What materials do you machine?
Mainly stainless steel and carbon steel.
What is your lead time?
About one week for standard pump parts machining. Rush work is accepted.
How long a shaft can you machine?
Up to 12 ft.
Do you fabricate pump parts, or only machine them?
We make replacement pump parts by CNC and conventional machining, from your drawing or from a sample. Fabrication here means machining the wear part, not welded package skids. Rotating parts can be balanced in the same shop when needed.
Where is your shop?
In Pasadena, TX, in the Houston area. We make pump parts there for buyers across Texas and the Gulf Coast and ship nationwide.
Send the part type, drawing or sample details, material, quantity and required date. Tell us whether balancing is also needed.